Theater Solutions OVCDG Outdoor Speaker Volume Control Gray

This Theater Solutions weatherproof impedance matching dial volume control is a full range volume control that can be adjusted to meet the requirements of your installation. With a simple change of the placement of two shorting bars on the printed circuit board, you can safely connect up to 8 pairs of 8Ohm speakers to a single amplifier, Receiver or selector box running at 8Ohm. Refer to the charts provided in the included installation manual to determine how to set the shorting bars to ensure the proper impedance matches the level being produced from your amplifier, Receiver or selector box. This dial volume control can be used with any combination of 4Ohm, 8Ohm or 16Ohm speakers by adjusting the shorting bars to the appropriate terminal setting. The dial has 12 steps of attenuation: first position is "off", steps 2 through 7 at 3dB each, steps 8 through 11 at 6dB each and the final position allows the signal from the amplifier, Receiver or selector box to pass through completely. The volume control is completely protected in the weatherproof PVC housing. The housing has a 1" Mount on the bottom for attaching a 1" Pvc wire pipe.
Theater Solutions OVCDG impedance matching dial Gray outdoor volume control, Use up to 8 pairs of speakers, 150 Watts RMS per Channel, Use up to 14 gauge wire
Use with 4ohm, 8ohm, and 16ohm speakers, impedance matching, use any amp with the independent ground, unit dimensions are 2.75" X 4.5" X 2.75"
Pvc Weatherproof housing, 1" Diameter mount, full instructions included
Use for in wall or in ceiling home entertainment, home theater, multiple room system, Industrial sound system, Marine audio, pools, spas, yards, decks
This Listing and price is for 1 volume control and full instructions